When machining tough materials like stainless steel or alloy steel, rigidity matters more than specs on paper. The Handemo TCK2300B full hard way turn‑mill with virtual Y‑axis is built for shops that need stable, repeatable precision without paying for a physical Y‑axis.

Hard Way Rigidity – Built for Heavy Cuts

Unlike linear guideways, hard ways provide higher rigidity and vibration damping – essential for heavy interrupted cutting. The Handemo TCK2300B uses a high‑quality cast iron bed with stress relief treatment. The hardened and ground guideways are precision scraped and coated for long‑term wear resistance. Result: you can take deep cuts (5mm+ DOC depending on material) without chatter, even on stainless and alloy steels.

Virtual Y‑Axis – Compact, Smart, Affordable

Instead of a bulky physical Y‑axis slide, Handemo’s CNC system uses C‑axis and X‑axis interpolation to create a virtual Y movement. This reduces machine complexity, lowers cost, and improves dynamic response. Equivalent Y‑axis travel reaches ±30mm – sufficient for most off‑center milling, drilling, and tapping tasks. Machining accuracy meets IT6‑IT7, making virtual Y a practical choice for real parts.

Powerful Drive & Fast Tool Change

• Spindle: 11/15kW high‑torque built‑in motor, 6,000 rpm – from heavy roughing to high‑speed finishing.

• Turret: 12 stations, 6 live tool positions. Indexing accuracy 0.002°, tool‑to‑tool change time 0.3 sec.

• Axes: X/Z positioning ±0.005mm, repeatability ±0.003mm. High‑gain servo tuning ensures smooth low‑speed feed despite hard way friction.

What You Can Machine

Hydraulic fittings, automotive steering knuckles, compressor rotors, valve bodies with side holes and four‑sided pyramids. One setup combines turning, milling, drilling, and tapping – eliminating multiple clampings. Efficiency gains of 40% or more are common.

Control & Software

Equipped with FANUC 0i‑TF or Siemens 828D, supporting full 5‑axis coordination (X, Z, C, virtual Y, live tool axis). Handemo provides a dedicated CAM post‑processor that automatically converts physical Y code to virtual Y commands. Built‑in compensation algorithms correct contour deviations caused by the virtual Y trajectory.

Who It’s For

Small and medium tool rooms and job shops that need high performance at a reasonable price. Compared to physical Y‑axis turn‑mills, the Handemo TCK2300B costs about 20% less while delivering nearly identical accuracy for real‑world parts. Hard way construction means longer life under heavy cutting – even if lubrication needs are slightly higher.

Practical Tips

• Tool center height must be exactly on spindle centerline – use a tool setter before each batch.

• Use ISO VG 68 or VG 100 way oil and check lubrication daily.

• Keep electrical cabinet cool with an air conditioner or heat exchanger.

Future Ready

Handemo is actively developing adaptive learning algorithms to push virtual Y accuracy to the next level. A tailstock version for long shaft parts is also in the pipeline.

If your shop machines tough, complex parts and wants to replace multiple setups with one clamping, the Handemo TCK2300B is a smart, proven choice.